Learn About RinseKit

How to fill your RinseKit

Want hot water or fill from a standard sink?

Drain your RinseKit to keep it working well

Frequently Asked Questions About RinseKit

What is a RinseKit?

The revolutionary RinseKit is a portable pressurized shower/clean up system that’s like having a hose to go!

How do I fill my RinseKit?


You can find directions on how to fill and drain your RinseKit printed on the top of the inside tray – just open the lid and there they are!

The RinseKit hose quickly attaches to your water spigot with a quick connect coupler and fills the two gallon eon™ pressure chamber with approximately 65 psi of water pressure (standard home pressure) in 20 seconds time — and can hold pressure for up to one month. Simply attach the spray nozzle to the RinseKit hose with the quick coupler, select one of the 7 spray settings and fire away! This patented design has no moving parts and can be filled with hot or cold water an infinite number of times.


Live in a condo or apartment? No spigot? Hot water?

Live in an Apartment or Condo? Don’t fret, get wet! RinseKit can be filled via most home sinks with our Sink Adapter. Follow the same steps as above on How do I fill my RinseKit.

Want Hot Water? RinseKit can be filled with warm/hot water via most home sinks with our Hot Water Sink Adapter.

Do I have to pump it up to get the pressure inside?

No pumping is necessary when you fill it with a standard hose spigot. Check out the Field Fill Kit which allows you to fill the RinseKit with still water and quickly pressurize the system with a standard bike pump.

Are there batteries inside?

No batteries, No moving parts. No nuclear reactors.

How do I know when it’s filled?

It should take approximately 20 seconds to fill completely. You can hear when the water stops flowing in and then you’ll know it’s full. Don’t worry, you can’t overfill the RinseKit or blow it up if you get distracted while filling it.

How much water does it hold?

2 gallons

How long will it maintain pressure?

It will hold it’s full pressure for at least one month.

How long will it spray for?

Your RinseKit will give you around 4 minutes of pressurized spray, depending on the pressure of the hose spigot that you filled it with.

How heavy is it?

RinseKit weighs 24lbs when it’s full and 9 pounds when it’s not.

What if I want a hot shower?

It’s insulated, so you can fill it with hot water via the Hot Water Sink Adapter and it will stay nice and warm for you. Coming soon, we will have an Heater Accessory heater that will allow you to heat up the water on the drive to your next adventure.

What if I don’t have access to a hose spigot?

Check out the Field Fill Kit which will allow you to fill the RinseKit with still water and quickly pressurize the system with a standard bike pump.

Where is the company based? How did it start?

We’re based in Carlsbad, California. The company was started by Chris Crawford, a surfer that felt there was a better way to clean up after surf sessions. He’s a classic American entrepreneur and very involved in all aspects of the company. We just have to figure out how to turn him off at night…

Why should I get a RinseKit when I can just use my gallon water jug to rinse off?

Because of the RinseKit’s pressurization system, the water usage is extremely efficient. It allows you to use only the water that you need to rinse gear, pets and people. Water conservation is a huge issue facing us all, so we are hopeful that the RinseKit will help inspire people to be more water wise.

How do I clean my RinseKit?


How do I drain my RinseKit?


What if my RinseKit is not holding pressure?